Deer trophy homologation
You can enter your measurements to see the score of your deer trophy
Bronze
Score
of 165 to 172,99 points CIC.
Silver
Score
of 173 to 180,99 points CIC.
Gold
Score
of 181 points CIC onwards.
Homologation console
1. Length of the antlers.
Measured along the outer curvature from the lower outer edge of the rosette to the end of the crown tip that gives the greatest total length. The measuring tape will be pressed against the antler at 3-4 cm. of the rosette and in the measurement, efforts will be made, as far as possible, not to vary direction.
left
right
2. Length of the fights.
Measured along the anteroinferior surface, from the junction with the rosette to the end.
left
right
3. Length of the central tips.
Measured along the anteroinferior face, from the bisector that divides the angle formed by this lamp with the horn to the end of the central tip. If the center tip splits into a fork, measure to the longest tip.
See guide
left
right
4. Perimeter of the rosettes.
Measured in the thickest section of the same, saving the roughness with the measuring tape.
left
right
5-6-7 and 8. Perimeter of the antlers.
Measured in the thinnest section of the indicated sections, without consideration of other possible existing tips.
5. Perimeter of the right horn, between the fighter and the central tip.
6. Perimeter of the left horn, between the fighter and the central tip.
7. Perimeter of the right horn, between the central tip and the crown.
8. Perimeter of the left horn, between the central tip and the crown.
9. Weight of the antlers.
The weight is taken in kilograms, with an appreciation up to 10 g. of the antlers and the skull free of all foreign matter.
– With the complete skull and without lower jaw, 0.70 kg will be deducted. of the total weight.
– With the skull sawed so that the upper teeth are missing, 0.50 kg will be deducted. of the total weight.
– With the skull sawed, presenting only the front, nothing will be deducted from the total weight.
– With the skull sawed so that it has the pivots and very little more bone, 0.15 to 0.20 kg will be added. of total weight.
– With the complete skull and without lower jaw, 0.70 kg will be deducted. of the total weight.
– With the skull sawed so that the upper teeth are missing, 0.50 kg will be deducted. of the total weight.
– With the skull sawed, presenting only the front, nothing will be deducted from the total weight.
– With the skull sawed so that it has the pivots and very little more bone, 0.15 to 0.20 kg will be added. of total weight.
10. Wingspan.
The maximum internal separation between the antlers:
– If it is less than 60% of the average length of the antlers: 0 points.
– From 60 to 70%: 1 point.
– From 70 to 80%: 2 points.
– Above 80%: 3 points.
– If it is less than 60% of the average length of the antlers: 0 points.
– From 60 to 70%: 1 point.
– From 70 to 80%: 2 points.
– Above 80%: 3 points.
10. Weight of the antlers.
They are weighed in kilograms, with an appreciation of up to 10 gr. , the antlers and the skull free of all foreign matter.
– With the complete skull and without the lower jaw, 0.25 kg will be deducted. of the total weight.
– With the skull sawed, so that the upper teeth are missing, 0.10 kg will be deducted. of the total weight.
– With the complete skull and without the lower jaw, 0.25 kg will be deducted. of the total weight.
– With the skull sawed, so that the upper teeth are missing, 0.10 kg will be deducted. of the total weight.
11. Number of tips.
To be considered a point, it must measure at least two centimeters at the shortest part. Each lamp is valued with one point.
12. Beauty.
Color.
– Light gray, yellowish or artificially dyed: 0 points.
– Gray to brown: 1 point.
– Dark brown to black: 2 points.
– Light gray, yellowish or artificially dyed: 0 points.
– Gray to brown: 1 point.
– Dark brown to black: 2 points.
Perlas.
– Smooth surface of the antlers: 0 points.
– Surface of the antlers slightly pearled: 1 point.
– Surface of the antlers well pearled: 2 points.
– Smooth surface of the antlers: 0 points.
– Surface of the antlers slightly pearled: 1 point.
– Surface of the antlers well pearled: 2 points.
Puntas.
– Porous or blunt: 0 points.
– Pointed and dark: 1 point.
– Pointed and white: 2 points.
– Porous or blunt: 0 points.
– Pointed and dark: 1 point.
– Pointed and white: 2 points.
Second fights. (Each one is valued separately) Points.
– Short (from 2 to 10 cm.): 0 points.
– Medium (from 10.1 to 15 cm.): 0.5 points.
– Long (more than 15 cm.): 1 points.
– Short (from 2 to 10 cm.): 0 points.
– Medium (from 10.1 to 15 cm.): 0.5 points.
– Long (more than 15 cm.): 1 points.
Crown. (All the points above the central point are part of the crown, and are measured by the shortest part, from the bisector with the antler). Second fights. (Each one is valued separately) Tips.
– Short tips: from 2 to 10 cm.
– Medium tips: 10.1 to 15 cm.
– Long tips: more than 15 cm.
– Short tips: from 2 to 10 cm.
– Medium tips: 10.1 to 15 cm.
– Long tips: more than 15 cm.
Number of points between both antlers.
– From 5 to 7, short: 1 to 2 points.
– From 5 to 7, averages: 3 to 4 points.
– From 5 to 7, long: 4 to 5 points.
– From 8 to 9, short: 4 to 5 points.
– From 8 to 9, averages: 5 to 6 points.
– From 8 to 9, long: 6 to 7 points.
– 10 or more, short: 6 to 7 points.
– 10 or more, averages: 7 to 8 points.
– 10 or more, long: 9 to 10 points.
– From 5 to 7, short: 1 to 2 points.
– From 5 to 7, averages: 3 to 4 points.
– From 5 to 7, long: 4 to 5 points.
– From 8 to 9, short: 4 to 5 points.
– From 8 to 9, averages: 5 to 6 points.
– From 8 to 9, long: 6 to 7 points.
– 10 or more, short: 6 to 7 points.
– 10 or more, averages: 7 to 8 points.
– 10 or more, long: 9 to 10 points.
If you want, you can download the deer trophy approval manual, you will be able to see all the very detailed measurements, to do the entire process well.
Total score
Congratulations, you have achieved a trophy with a score of
Punctuation